Skip to content 
This is the one recall on our electrical panel recall list that could plausibly involve a panel installed in your home in the last few years. Every other entry concerns equipment from the 1950s through the 1980s. The recalled Square D panels were sold as recently as January 2022, including at Home Depot and Lowe’s.
If your home in Vancouver, Ridgefield, or Camas was built or rewired between 2020 and 2022, it is worth taking the time to check if your panel is affected.
What is the Square D Panel Recall?
On June 16, 2022, Schneider Electric recalled roughly 1.4 million Square D QO Plug-on-Neutral load centers in the United States, with another 289,000 in Canada (CPSC recall notice). The issue was specific and mechanical. A wire binding screw inside the lug body may not have been torqued properly to the plug-on-neutral bar. Over time that unsecured joint can lose the neutral connection, and a loose neutral connection can overheat.
The stated hazard was thermal burn and fire. Schneider reported one incident involving a loose connection, with no injuries or property damage, and said it did not believe there was an imminent threat. Affected units should be inspected, with any required repair or replacement provided at no cost.
How to Check Whether Your Panel is Part of the Square D Panel Recall
| Detail | What applies |
|---|---|
| Product | Square D QO Plug-on-Neutral load centers, also sold as breaker boxes or electrical panels. |
| Manufacturing window | February 2020 through January 2022. |
| Identification | Date codes: 200561 – 220233. Verify the catalog number and date code with Schneider. |
| Covers and boxes | Circuit breaker boxes with covers that were manufactured from December 2019 through March 2022 are also included in the recall. |
| Where sold | Schneider distributors plus Home Depot, Lowe’s, and Menards nationwide. |
| Price range when sold | Roughly $90 to $1,660. |
| Remedy | Free inspection and repair, or replacement. |
Table 1: Key details of the 2022 Square D QO Plug-on-Neutral recall. Verify your exact catalog number against the CPSC notice.
Finding the date code is the tricky part, and this is where we want to be straight with you. On an outdoor load center, the code is printed inside the cover or door, and you can usually see it by opening the door. On an indoor load center, the date code may not be visible without removing the dead front.
Do not remove the dead front yourself. The CPSC recommends having a qualified electrician locate the interior date code because the components behind the cover may remain energized, which can be a serious shock hazard. If you want to know what you can safely check on your own, our panel safety guide covers it.
What to Do If You Have One
- Don’t panic or rip anything out. If you think your panel may be part of the Square D panel recall, Schneider provides a free inspection, and any required repair or replacement is also free.
- Look for a green dot. Some compliant inventory was marked with a green dot on the carton and is excluded from the recall. For an installed panel, verify the catalog number and date code rather than relying on packaging markings.
- Contact Schneider directly.
- Or have us verify it. We can confirm the model and date code during an inspection and tell you whether you’re in the affected range.
The Bigger Picture on Square D
A recall like this is worth taking seriously, but it does not make every Square D panel a problem. The recall is limited to a specific group of QO Plug-on-Neutral load centers, so the important question is whether your panel is part of that group.
If you’re unsure, there is no need to guess based on the age or brand of the panel. A licensed electrician can verify whether your equipment is affected. That is a much better approach than assuming every Square D panel is affected or dismissing the recall altogether.
Want a second set of eyes on it? MAS Pro offers free panel inspections across Clark and Cowlitz County.
Book a free inspection or call the number above. If you smell burning or see scorching around your panel right now, call our emergency electrical line instead of waiting.
Frequently Asked Questions
Is my Square D panel dangerous?
The recall affects specific Square D QO Plug-on-Neutral load centers manufactured during the affected period. If your panel is within the recalled range, Schneider recommends having it inspected rather than assuming the panel is safe or unsafe.
Does the recall include Homeline panels?
The recall named QO Plug-on-Neutral load centers. If you’re unsure what panel you have, check the catalog number against the CPSC notice or ask us to verify it during an inspection.
Who pays for the fix?
Schneider Electric provides a free inspection, and any required repair or replacement is covered under the recall program. That’s the first call you should make.
Do I need a permit if the panel gets replaced?
Panel replacement in Washington generally requires a permit and inspection under state electrical rules. We handle the paperwork and meet the inspector.
Disclaimer: This article is general educational information, not a safety assessment of any specific product or installation. Recall status, panel condition, and the right course of action depend on the individual equipment in your home and must be verified by a licensed electrician. Recall details are summarized from public notices that may be updated or superseded; always confirm current information directly with the U.S. Consumer Product Safety Commission or the manufacturer. Brand names are used only to identify equipment accurately and do not imply any affiliation with, or endorsement by, their owners.
